91一级免费视频网站,淫淫涩涩伊人,国产成人精品免费视频大全五级,又污又黄又无遮挡网站,91热这里只有精品,国产ssss在线观看极品,激情综合亚洲欧美日韩

客戶榮譽
kehury
技術文章
  • 常州Low Phase Noise Reference Source 96040A
  • 里氏硬度計在熱處理行業中的應用
  • 激光測距儀新方法,新應用
  • 高低溫試驗箱故障解決
  • 分析儀器介紹
  • 低溫閥門容易發生卡死扳不動的原因
  • RIGOL開關電源測試方案
  • 溫度測量儀表的分類
  • 洛氏硬度(HR)原理
  • 什么是接地電阻測試
  • 常州阿爾豐機械有限公司
    常州艾齊瑞機械設備有限公司
    常州安霸自動化設備有限公司
    常州奧普托機械制造有限公司
    常州奧斯美機械設備有限公司
    常州百爾川模型有限公司
    常州百家匯工程機械有限公司
    常州百羅特緊固件廠
    常州寶飛機械有限公司
    常州常鉬數控機械設備有限公司
    常州常耐動力機械有限公司
    常州常友熱處理有限公司
    常州超林機械有限公司
    常州誠實機械有限公司
    常州誠信廚房設備有限公司
    常州馳電精密機械有限公司
    常州馳工液壓設備有限公司
    常州仇氏機械有限公司
    常州川勤機械涂裝設備有限公司
    常州大業船用設備制造有限公司
    常州道同工程機械有限公司
    常州道源機械智能技術有限公司
    常州德飛機械有限公司
    常州德廣精密機械有限公司
    常州德馬特機械有限公司
    常州迪悉精密機械有限公司
    常州頂潤機械有限公司
    常州鼎協機械制造有限公司
    常州鼎亞模具有限公司
    常州東陽太陽能工程有限公司
    常州貳拾陸度機床附件制造有限公司
    常州凡玖傳動設備有限公司
    常州飛奇機械有限公司
    常州豐饒精密機械有限公司
    常州豐一園冷暖設備有限公司
    常州福祿動力機械有限公司
    常州富仁涂裝設備有限公司
    常州國傲刀具科技有限公司
    常州海盾船用機械設備有限公司
    常州海恩機械科技有限公司
    常州海蘭德精密機械有限公司
    常州涵潞精密鍛造有限公司
    常州漢旗機械制造有限公司
    常州好享節能設備有限公司
    常州昊鋒諾機械有限公司
    常州浩源港口設備有限公司
    常州宏昊自動化設備有限公司
    常州華貝涂裝設備有限公司
    常州華帆軸承有限公司
    常州桓基機械有限公司
    常州匯意特機電裝備有限公司
    常州霍格姆機械有限公司
    常州吉程瑞元機械設備有限公司
    常州佳曼軸承有限公司
    常州佳斯特機械科技有限公司
    常州佳軸軸承有限公司
    常州嘉業智能裝備科技有限公司
    常州建金高頻設備廠
    常州健澤機械有限公司
    常州箭速機械科技有限公司
    常州金爾特模具科技有限公司
    常州金槐機械有限公司
    常州勁凱機械制造有限公司
    常州井夏機械設備有限公司
    常州景騰模型有限公司
    常州九一涂裝設備有限公司
    常州九友清洗有限公司
    常州居陽電機維修廠
    常州巨方機械設備有限公司
    常州俊牌模具有限公司
    常州俊昇模具有限公司
    常州康克斯機械有限公司
    常州科力新機械科技有限公司
    常州克來奇軸承有限公司
    常州快捷特包裝機械有限公司
    常州萊普鑫自動化設備有限公司
    常州朗尊緊固件有限公司
    常州樂梯高機械設備有限公司
    常州雷尼信智能電機有限公司
    常州磊鴻武精密機械有限公司
    常州力馬干燥機械有限公司
    常州利庭機械有限公司
    常州聯創精研微軸制造廠
    常州良譽機械有限公司
    常州林光機械有限公司
    常州領航機械有限公司
    常州隆仕瑪自動化設備有限公司
    常州馬塞爾機械設備有限公司
    常州麥吉機械科技有限公司
    常州蔓庭拓普工程機械有限公司
    常州銘威機械有限公司
    常州摩那機械科技有限公司
    常州能揚機械有限公司
    常州珀銳數控設備有限公司
    常州普東自動化設備有限公司
    常州啟拓機械設備有限公司
    常州汽能機械科技有限公司
    常州慶普機械有限公司
    常州慶陽精密機械有限公司
    常州求鼎精密機械有限公司
    常州熱陽機械有限公司
    常州人江模具機械廠
    常州瑞博特精密機械有限公司
    常州瑞海模具有限公司
    常州薩米特機械設備有限公司
    常州賽孚機械制造有限公司
    常州山崎機械有限公司
    常州世百通軌道設備銷售有限公司
    常州市安航機械有限公司
    常州市百旭機械有限公司
    常州市邦普機械有限公司
    常州市博高機械有限公司
    常州市博棱機械有限公司
    常州市常安機床搬運有限公司
    常州市常茂模具有限公司
    常州市超牛涂布設備有限公司
    常州市晨可模型有限公司
    常州市程偉鑄造有限公司
    常州市創導干燥設備有限公司
    常州市達祺機械有限公司
    常州市德珀特機械有限公司
    常州市釘當機械制造廠
    常州市東順清洗有限公司
    常州市都是佳滾針軸承廠
    常州市芳能機械有限公司
    常州市豐源機械制造有限公司
    常州市福依特機械有限公司
    常州市高博機械有限公司
    常州市躬耕志機械有限公司
    常州市廣燁軸承有限公司
    常州市海達自動化設備有限公司
    常州市韓現工程機械有限公司
    常州市瀚鐸機械制造有限公司
    常州市恒納機械有限公司
    常州市華勝達機械有限公司
    常州市環通自動化設備有限公司
    常州市江南環保設備有限公司
    常州市捷誠佳隆數控設備有限公司
    常州市捷佳順涂布設備有限公司
    常州市金港港口設備有限公司
    常州市錦名順機械設備有限公司
    常州市錦珊瑚機械有限公司
    常州市晶瑩機械制造有限公司
    常州市軍寶河機械制造廠
    常州市駿壘機械有限公司
    常州市科峰涂裝材料有限公司
    常州市科捷自動化設備有限公司
    常州市科語豐干燥設備有限公司
    常州市坤德機械廠
    常州市坤仁機械有限公司
    常州市坤翔機械有限公司
    常州市獵豹焊割設備有限公司
    常州市靈動智能裝備有限公司
    常州市閩牌機械有限公司
    常州市茗杰銳機械設備有限公司
    常州市銘誠機械有限公司
    常州市南鼎機械設備有限公司
    常州市歐仁模具有限公司
    常州市鵬林機械設備有限公司
    常州市鵬澤機械制造有限公司
    常州市普和瑞機械有限公司
    常州市奇特樂減速機有限公司
    常州市榮宏機械廠
    常州市潤躍機械有限公司
    常州市上銳工業緊固件有限公司
    常州市生久不銹鋼制品有限公司
    常州市勝天模具有限公司
    常州市雙旺機械科技有限公司
    常州市斯貝佳滾針軸承有限公司
    常州市斯諾威特電機有限公司
    常州市索比特起重機械有限公司
    常州市太利得制冷設備有限公司
    常州市泰強機電有限公司
    常州市泰瑞精密刀具有限公司
    常州市天邦機械有限公司
    常州市亭星減速機有限公司
    常州市通華機械有限公司
    常州市圖邦干燥工程有限公司
    常州市拓陽干燥機械有限公司
    常州市偉威機械制造有限公司
    常州市五彩鳳凰涂裝有限公司
    常州市五星三邦貨物流有限公司
    常州市武進區遙觀福瑞德機械有限公司
    常州市希誠機械有限公司
    常州市星潤裕機械有限公司
    常州市雪冰冷藏設備有限公司
    常州市永平機械制造有限公司
    常州市友利桐自動化設備有限公司
    常州市宇能制冷設備有限公司
    常州市煜得博機械有限公司
    常州市元濤機械有限公司
    常州市云耀機械有限公司
    常州市展辰緊固件有限公司
    常州市長航精密機械有限公司
    常州市振志機械有限公司
    常州市正牌機械設備有限公司
    常州雙運機械制造有限公司
    常州順創精密機械有限公司
    常州順宏機械有限公司
    常州思燁電機科技有限公司
    常州蘇邁克機械有限公司
    常州蘇群干燥設備有限公司
    常州速萊自動化設備有限公司
    常州騰錦機械制造有限公司
    常州騰聯塑料機械有限公司
    常州騰軒機械科技有限公司
    常州騰翼精密模具廠
    常州天酬機械制造有限公司
    常州天祥節能科技有限公司
    常州拓朗工程機械有限公司
    常州萬達九州機械有限公司
    常州萬佳電機有限公司
    常州萬騰超聲波設備有限公司
    常州威如機械部件有限公司
    常州威森豪機械有限公司武進分公司
    常州韋文清洗有限公司
    常州文亮機械廠
    常州文予機械有限公司
    常州錫力動力機械有限公司
    常州錫衛德動力機械有限公司
    常州先竹干燥設備有限公司
    常州新盛太陽能科技有限公司
    常州新優涂涂裝科技有限公司
    常州鑫得力起重設備有限公司
    常州鑫向力機械有限公司
    常州鑫佑軍機械有限公司
    常州雄博工程機械有限公司
    常州軒致機械制造有限公司
    常州延賢機械制造有限公司
    常州耀富標準件有限公司
    常州燁聯軸承有限公司
    常州一航焊割設備有限公司
    常州伊力亞特機械設備有限公司
    常州億善干燥設備有限公司
    常州優加利焊割設備有限公司
    常州優真機械設備有限公司
    常州悠長久源農機有限公司
    常州友創力機械制造有限公司
    常州又引精密機械有限公司
    常州佑品精密機械有限公司
    常州遠鴻精密機械有限公司
    常州澤祺佳機械有限公司
    常州治力機械科技有限公司
    常州中釬焊接裝備制造有限公司
    常州中宇機械設備科技有限公司
    常州眾百福工程機械有限公司
    常州重光齒輪制造有限公司
    常州宙斯盾動力機械有限公司
    當前位置:首頁 > 常州儀器儀表 > 常州電子電工 > 常州計量校準
    Low Phase Noise Reference Source
    型 號:96040A
    品 牌:美國FLUKE
    技術指標:Range 1 mHz to 4 GHz
    常州Low Phase Noise Reference Source-96040A-美國FLUKE

    Simplify your RF calibration system

    The Fluke Calibration 96040A RF Reference Source enables you to simplify your RF calibration system by replacing many of the instruments and accessories that make up your current system. Its precision signal level and attenuation, high signal purity and precision low distortion modulation make this reference source superior to the general-purpose signal generators that are often used to calibrate spectrum analyzers, modulation meters, RF sensors, attenuators, and similar instruments. Its low phase noise provides superior phase noise performance.

    Unlike many RF calibration solutions, the 96040A is designed specifically for RF calibration, with a calibration-oriented user interface that makes it easy to learn and use. The 96040A speeds up calibration procedures, reduces opportunities for operator errors, and greatly simplifies RF metrology. As the core of an RF and microwave calibration system, the 96040A covers the majority of test points required for calibrating spectrum analyzers of any frequency range.

    Automated with MET/CAL® Plus Calibration Management Software, the 96040A reduces complexity and calibration times, dramatically improving efficiency and increasing capacity by 50 % or more over manual methods.

    Key benefits

    ·         Covers a broad range of RF calibration workload

    ·         Reduces the number of instruments and interconnections required for your RF calibration system

    ·         “What you set is what you get” accurate signal delivery direct to the UUT input

    ·         Integrated 50 MHz frequency counter eliminates need for an additional instrument • Calibration-specific interface simplifies technician tasks

    ·         Simplifies uncertainty calculations by delivering known signals direct to the unit under test (UUT)

    ·         Lowers RF system maintenance costs

    ·         With automation, reduces spectrum analyzer calibration times by as much as 50% over manual methods

     

    Broad, versatile workload coverage

    The 96040A calibrates a broad workload of RF calibration devices, including:

    • Spectrum analyzers

    • Modulation meters and analyzers

    • RF power meters and sensors

    • Frequency counters

    • Attenuators

    • And more

    The metrology associated with calibrating these items becomes simpler because you have fewer error sources and uncertainty contributions to consider.

    More than just an RF calibrator

    There are many applications in research and development, manufacturing test, and ATE needing better performance than a general purpose signal generator. If wide frequency coverage, frequency resolution, low harmonics, phase noise and spurious content, signal level and attenuation accuracy, or dynamic range are critical parameters the 96040A is an ideal solution.

    Cut the cost of your RF calibration system in half

    As the central instrument in a high capability RF spectrum analyzer calibration system, the 96040A can cut your costs in half. The 96040A replaces all of these parts of a “typical” RF calibration system:

    Up to four signal sources (from audio/ function generators to RF signal and low phase noise sources)

    ·         Power meters and power sensors

    ·         Step attenuators

    ·         Filters

    ·         Pads

    ·         Couplers

    ·         50 MHz frequency counter

    The 96040A not only reduces the initial need to purchase, install and configure RF system components, but it also reduces the maintenance and calibration costs associated with all of that equipment. The 96040A is also easier to transport than a heavy rack of equipment and accessories, making it a good solution for on-site calibration.

    With its 4 GHz frequency range, the 96040A performs more than 80 % of all the tests required on high performance, high frequency spectrum analyzers.

    For workload items that require frequencies beyond 4 GHz, you can use an RF and microwave source that you probably already own alongside the 96040A to address the few remaining higher frequency test points. For many spectrum analyzer models operating below 4 GHz, you only need a 96040A to perform the entire calibration. You can’t simplify much more than that!

    No need for additional function generators

    The 9640A Reference Source’s internal modulation capability makes it suitable for applications that require precision modulation to be applied to the output signal, such as modulation analyzer calibration and spectrum analyzer sweep time testing using an AM signal with more accurate modulation rates. You don’t need additional function generators as a low frequency modulation source—the 96040A delivers it all.

    Designed for RF calibration

    The 96040A user interface is designed to simplify processes for calibrating typical items in your workload, such as spectrum analyzers, RF level meters and receivers. Parameter offset, stepping, relative and UUT/DUT error readout modes allow you to work accurately and efficiently, following familiar calibration procedures. You’ll find it easier than ever to determine the performance and tolerances of units under test.

    The 96040A front panel is equipped with dedicated function keys, context-sensitive softkeys, and a bright, easy-to-read color display that make it easy to learn and operate. You can set output levels in terms of power (watts or dBm), voltage (RMS or peak to peak) using familiar multipliers and exponent forms. You can move easily between voltage, power and dBm units without losing entered values or accuracy. In error readout mode to adjust the reading, simply rotate the spin wheel and the UUT error is displayed directly in dB, ppm or percent.

    The simple, calibration-oriented user interface also makes troubleshooting easier if you encounter an unexpected result or an out-of-tolerance condition while following a manual or automated calibration procedure.

    “What you set is what you get” accuracy and signal purity

    A rugged, precise levelling head delivers 96040A signal levels directly to the unit under test (UUT) input just the way you set them on the front panel. This unique “What you set is what you get” feature helps you avoid problems like losses, noise, interference, and mismatch errors, which can be caused by using intermediate connectors and cables. This approach also maintains the integrity of low-level signals. The head maintains signal precision and noise immunity throughout a 154 dB dynamic range, down to the very lowest levels at -130 dBm.

    The leveling head reduces lead changes from 25 to just 5 during a typical calibration, allowing you to “connect once and test many,” extending unattended times in an automated system, and reducing connector wear.

    Calibrated as a system to assure system performance

    The 96040A is supplied with a 50 ohm leveling head. The /75 model has both 50 ohm and 75 ohm leveling heads. Each mainframe and head are calibrated together as a complete system. System calibration helps assure overall system performance. Each 96040A instrument is supplied with a comprehensive ISO 17025 compliant certificate of calibration with data for all key parameters, including level and attenuation, output VSWR, and phase noise. You can be assured that your 96040A is traceable, plus RF metrology and uncertainty analysis become much simpler and faster. Accredited certification is available for the 96040A and both 50 ohm and 75 ohm heads.

    State-of-the-art phase noise performance

    With reduced low phase noise optimized for low and high offset frequencies and specifications from 1 Hz to 10 MHz offsets, the 96040A offers exceptional phase noise performance beyond that required for today’s high performance workloads.

    Phase noise data is included in the 96040A certificate of calibration. Instead of relying only on the more conservative guaranteed specifications, users have actual performance data for their unit. Even with the best low phase noise signal generators, filters are commonly used during spectrum analyzer phase noise calibration tests, reducing noise levels at wide (high) offset frequencies to improve test margins. The 9600FLT 1 GHz bandpass filter accessory is designed specifically for high performance spectrum analyzer wide-offset phase noise testing and connects easily to 96040A models in either benchtop or rack-mounted applications.

    Selectable frequency reference input/ output expands functionality

    Selectable external frequency reference input is available as a standard feature on the rear panel of the 96040A. The input allows you to lock the frequency output to an external reference, such as the Fluke Calibration 910R Rubidium Standard, for applications where high clock accuracy or use of a common reference frequency is important. The frequency reference output allows a UUT to be frequency locked to the 96040A internal reference clock. This configuration is often required to reduce frequency offset errors that may occur between the reference source and the UUT.

    Simplify frequency response tests with 96040A sweep functions

    RF applications often require a frequency sweep. The 96040A’s sweep functions simplify the application of manual legacy spectrum analyzer frequency response testing, as well as filter response measurements.

    Automate with MET/CAL® software for “walk-away” efficiency

    In a typical automated RF calibration process, the operator must frequently intervene to change test setups, thus limiting the benefits that can be realized by the automation. Walk-away automation can increase calibration system capacity by up to 25 percent using procedures you develop in MET/CAL Plus Calibration Management Software. For example, the manufacturer’s calibration procedure for calibrating the Agilent E4407B 26.5 GHz spectrum analyzer requires 27 different and complex test setups. On the other hand, the 96040A, used with MET/CAL Plus Calibration Management Software, can perform the major core of required tests with a single setup. Only six additional setups would be needed using a MET/CAL procedure.

    MET/CAL procedures created by Fluke Calibration for the 9640A models can be used by the 96040A in 9640A emulation mode. Optimized automated procedures can save time for the operators by allowing them to leave the system running while attending to other work. For example, the E4407B MET/CAL procedure for the legacy 9640A, running in emulation mode on the 96040A, allows for a total 90 minutes of “walkaway” time within the total two-hour calibration runtime.

    Using the 96040A with other automation solutions

    The 96040A is also integrated easily into existing automated systems and software. The time savings and efficiency gains offered by the 96040A can be realized by structuring test sequences to take full advantage of its “connect once measure many” capabilities.

    The 96040A is designed to match or exceed the performance and functionality of the HP3335A and HP8662/3A in calibration systems. With HP3335A and HP8662/3A GPIB command emulation as standard, replacing these popular but obsolete and difficult-to-maintain products becomes just a plug-and-play substitution.

    96040A summary specifications*

     

    Frequency specifications

    Level specifications
    (50 Ωoutput, see extended specifications for 75Ω)

    Range

    1 mHz to 4 GHz

    -130 to +24 dBm to 125 MHz, 14 dBm at 4 GHz (leveled)

    Resolution

    10 μHz

    0.001 dB

    Accuracy

    ± 0.05 ppm ± 5 μHz

    Down to -48 dBm: ± 0.03 dB to 100 kHz, ± 0.05 dB to 128 MHz, ± 0.3 dB at 4 GHz
    10 MHz to 128 MHz: ± 0.05 dB to -48 dBm, ± 0.1 dB to -84 dBm , ± 0.7 dB at -130 dBm

    Attenuation

     

    ± 0.02 dB to 49 dB, ± 0.15 dB at 110 dB
    Relative to +10 dBm, 10 Hz to 128 MHz

    VSWR

    ≤ 100 MHz: ≤ 1.05, ≤ 2 GHz: ≤ 1.1, 2 GHz to 4 GHz: ≤ 1.0 + 0.05 xf (GHz)

    Harmonics and spurious

    –60 dBc harmonics, –78 dBc spurious to 1 GHz

    Phase noise at 1 GHz

    –144 dBc/Hz, typical, at 10 kHz to 100 kHz offset

    Modulation

    AM, FM, PM, internal and external. Frequency pull and external leveling

    Frequency sweep

    1 mHz to 4 GHz. Linear or Logarithmic. Stop-Start or Center-Span

    Frequency counter

    Internal 50 MHz frequency counter

    Temperature

    Operating: 0 °C to 50 °C, 23 °C ± 5 °C for specified performance; Storage: -20 °C to +70 °C.

    Standard interfaces

    IEEE-488.2 (GPIB)

    GPIB command emulation

    9640A, 9640A-LPN, 9640A-LPNX, HP3335, HP8662A, HP8663A.

    Dimensions (HxWxD)

    146 mm x 442 mm x  551 mm (5.8 in x 17.4 in x 21.7 in) including handles Industry-standard 19 in (483 mm) rack mounting when fitted with Y9600 rack mounting kit

    Weight

    18 kg (40 lb)

    *Key specifications summary. Refer to the extended specifications for full and detailed specifications.

     

    型號

    描述

    96040A

    4 GHz RF Reference Source including 50ΩLeveling Head

    96040A/75

    4 GHz RF Reference Source including 50Ωand 75ΩLeveling Heads

    通用配件:


    配件

    描述

    9600FLT

    1GHz寬偏移相位噪聲濾波器

    9600CONN

    Adapter/Torque Kit

    Y9600

    機架安裝套件

    96000CASE

     Rugged Transit Case

     

    ,,
    同類產品
    地址:青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話:0532-86069117 83812497 83821263
    傳真:0532-88786387 網址:m.yzsuntu.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號