丹東CNC機械加工有限公司
丹東奧龍射線儀器集團有限公司 丹東佰匯達檢測設備有限公司 丹東邊境經濟合作區路豐機械廠 丹東邊境經濟合作區英浩工礦機械廠 丹東博能空氣凈化材料有限公司 丹東博威磨片有限公司 丹東博軒實驗室設備有限公司 丹東辰陽泵業有限公司 丹東晨明機械銷售有限公司 丹東誠大電器有限公司 丹東城市之光電子有限公司 丹東矗鑫機械制造有限公司 丹東達盈機械制造有限公司 丹東大成精工機械有限公司 丹東大迪礦山科技有限公司 丹東大海機械加工有限公司 丹東大信三能貿易公司 丹東大禹節水設備有限公司銷售部 丹東德元電力電器有限公司 丹東豐能工業股份有限公司 丹東光大電力設備制造有限公司 丹東昊朋機械有限公司 丹東浩邦船舶機械有限公司 丹東浩順晶密辦公用品店 丹東浩順晶密金融機具專營店 丹東合作有限公司 丹東和東貿易有限公司 丹東恒誠環�？萍奸_發有限公司 丹東恒豐機電設備有限公司 丹東恒通密封有限公司 丹東恒興鑄造有限公司 丹東弘程機械有限公司 丹東虹泰儀器有限公司 丹東鴻潤節水灌溉設備有限公司 丹東華辰鎖業有限公司 丹東華東機床有限公司 丹東華駿機床有限責任公司 丹東華興造紙機械有限公司 丹東寰杰新空氣設備有限公司 丹東匯泉貿易有限公司 丹東金波倫機械廠 丹東金達機械制造有限公司 丹東金鼎科技有限公司 丹東金港建材有限公司 丹東金星韓國床墊溫控系統有限公司 丹東凱利冶金機械有限公司 丹東凱銘流體機械制造有限公司 丹東科邁特射線儀器有限公司 丹東克隆集團有限責任公司 丹東樂語通訊設備銷售有限公司鳳城分公司 丹東樂語通訊設備銷售有限公司開發區分店 丹東樂語通訊設備銷售有限公司七經街分店 丹東雷恒泵業有限公司 丹東林昌機械設備有限公司 丹東林帝公司 丹東林帝科技發展有限公司 丹東龍工機械有限公司 丹東瀧田模具制造有限公司 丹東淼源儀器儀表有限公司 丹東寧遠機電設備有限公司 丹東平隆機械制造有限公司 丹東榮昌輕工機械有限公司 丹東三藝防水材料總廠 丹東申泰機電設備有限公司 丹東圣達儀器儀表有限公司 丹東盛芯電子設備配件廠 丹東盛譽科技有限公司 丹東市安泰機械化施工有限公司 丹東市常青金屬表面處理廠 丹東市程達精密機械有限公司 丹東市大陸機械有限公司 丹東市大元水泵物資經銷處 丹東市道興機械有限公司 丹東市德川機械制造有限公司 丹東市德元電力電器有限公司 丹東市東博科技電器有限公司 丹東市東發壓鑄有限公司 丹東市東力化纖機械配件廠 丹東市東勝工程機械有限公司 丹東市海協礦業發展有限公司 丹東市恒寅機械制造廠 丹東市恒運土石方機械工程有限公司 丹東市宏遠機電設備安裝有限公司 丹東市華夏鑄業有限公司 丹東市環達貿易有限公司 丹東市黃海環保機械設備有限公司 丹東市江林電子有限公司 丹東市聚興鑄造廠 丹東市寬廣機械有限責任公司 丹東市浪頭振興機械鑄造廠 丹東市熱工儀表廠 丹東市三英貿易有限責任公司 丹東市天時利精密機械廠 丹東市無損檢測有限公司 丹東市鑫星機械電器有限責任公司 丹東市鑫淵農機有限公司 丹東市星純機電設備有限公司 丹東市陽光紙模包裝機械廠 丹東市永強機械制造有限公司 丹東市元寶區蛤蟆塘水泵廠 丹東市元寶區金圣達機電設備廠 丹東市元寶區雙合焊接設備廠 丹東市元寶區星倫機械加工廠 丹東市元寶區興源精密機械廠 丹東市元寶區智成機械加工部 丹東市振安區大地食品機械廠 丹東市振安區方大沖壓機械廠 丹東市振安區日新鑄造廠 丹東市振安區盛茂油泵廠 丹東市振安區湯山城寶成機械廠 丹東市振安區同興鎮松林機械廠 丹東市振安區五龍背耀宇農林機械廠 丹東市振安區鑫誠工程機械修配廠 丹東市振興區春生輕工機械廠 丹東市振興區東海機械廠 丹東市振興區鋒亞墊片廠 丹東市振興區洪硅燒烤設備廠 丹東市振興區黃海潤滑油調試廠 丹東市振興區全鑫機械廠 丹東市振興區三聯模具廠 丹東市振興區四合機械加工廠 丹東市振興區通達文件柜廠 丹東市振興區興大軸承廠 丹東市振興區振成鑄造廠 丹東市振興區中興機械鉚焊廠 丹東市眾澤園酒店管理有限公司 丹東雙力礦山機械有限公司 丹東天大機械有限公司 丹東天和檢測有限公司 丹東天和實業有限公司 丹東天華密封制造有有限公司 丹東天翔液壓氣動有限公司 丹東鐵高閥門機械制造有限公司 丹東通廣射線儀器有限公司 丹東萬達電纜卷筒有限公司 丹東萬盛機電設備制造有限責任公司 丹東威達工程機械有限公司 丹東威斯閥業有限公司 丹東相三轉盤軸承制造有限公司 丹東祥業電氣有限公司 丹東新科無損檢測有限公司 丹東新盛造紙機械有限公司 丹東新亞洲模具有限公司 丹東鑫隆機械有限公司 丹東星海工程機械有限公司 丹東興運貿易有限公司 丹東鴨綠江包裝機械有限公司包裝機械廠 丹東澤利普機電設備有限公司 丹東長興電器有限公司 |
A powerful, complete hydraulic pressure calibration system to cover a wide workload Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include: · No weights to load and unload, transport or send out for calibration · Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature · No piston-cylinder changes · No significant sensitivity to level or vibration · Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration · Operates in any unit of measure, switching easily from one unit to the next The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers. The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers. The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi). The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface. RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly. The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi). The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available. High performance calibration made simple Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box. · Pressure ranges available to 200 MPa (30,000 psi) · ± 0.02 % of reading total one-year accuracy, 0.025 % for two years · Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort · Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation · Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 · Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium · AutoTest™, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment · Optional foot switch accessory allows hands-free data collection when running AutoTests · Rechargeable battery pack and transport case options for field operation
·
·
1. Combined linearity, hysteresis, and
repeatability. Precision does not include stability or calibration reference
uncertainty.
通用配件:
，，
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
       |
| 地址：青島市嶗山區海爾路29號溫哥華花園5-1-401 電話：0532-86069117 83812497 83821263 傳真：0532-88786387 網址：m.yzsuntu.com 青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號 
|
 |